PERFORMING A TEST ASSEMBLY USING 3D SCANNING

The key point of the product of the steel structure is the trial assembly of shipping elements, which is used to verify the geometric of the work performed. In the case of large objects, when it is not possible to assemble the entire structure, at least two adjacent sections are connected with each other. The traditional way of performing a trial assembly, which has been briefly described above, causes that we encounter a large number of technical difficulties, which thanks to the 3D scanning method are eliminated.

TEST ASSEMBLY PROCESS IN 3D SCANNING TECHNOLOGY

The individual scans of the measured assembly sections are submitted in a computer program, the end result of which is a report specifying the places where the performance deviations are exceeded (i.e. require correction) with an indication of their values. Below, we present a brief overview of how the use of our services generates savings and increases quality in your company.

ADVANTAGES OF TEST ASSEMBLY WITH THE FARO X130 3D SCANNER

• Shortening the implementation time of the entire investment
• The measurement may be performed while the sections are being assembled and not, as in the traditional method, only after all works are completed.
• The time needed for measurements is much shorter
• No need to involve your own employees for the trial assembly (i.e. transport and setting of supports, scaffolding and assembly sections) allows you to allocate them to other tasks.
• The time it takes for items to be ready for shipment is shortened.
• The assembly time at the construction site is shortened due to the greater accuracy of the elements made.

 

SAVING MONEY

• Performed by one person
• The measurement is performed at the place of folding a single shipping element, without the need to transport it to the assembly site.  No need for overhead cranes
• The measurement is performed in any position of the element, without the need for geodetic setting.
• No need for additional supports for setting the sections for trial assembly
• Less space required for the construction and its trial assembly

 

MORE ACCURACY AND HIGHER QUALITY OF THE MADE CONSTRUCTION

• The accuracy of the measurement is +/- 2mm
• Number of measurement points: up to 976,000 / second
• Graphical interpretation of the results of the measured deformations allowing for precise indication of places requiring repair